Reconnect - R3 Wi-Fi Level Sensor
The app has two methods to reconnect a v2 sensor to a Wi-Fi network. The default mode is called BlueConnect, which uses a temporary bluetooth connection to send network credentials to the sensor.
Reconnect a sensor using BlueConnect
In the TankMate app, go to Settings > Sensor / Tank Settings > Edit Network Settings
Put the sensor into BlueConnect mode - unscrew the sensor from the tank. Turn the sender unit upside down, and hold the RESET button for 6-8 seconds then release.
The unit will go to sleep to conserve power after 3 mins. Click RESET again to wake it up if required
Follow the prompts in the app to scan and connect to the sensor. Ensure the status light on the sensor is still blinking. Select the TankMate device, and proceed to the network SSID and password page
NOTE: WiFi passwords that include the $ symbol are not currently supported by TankMate sensors. We recommend modifying the password, or setting up a guest network with a different password.
For a more detailed outline of the BlueConnect process - see here
Last updated